KangerTech EMOW Starter Kit is the latest electronic cigarette kits
from KangerTech. 5 colors for your selection. Both the battery and
cartomizer are newly designed with Stainless Material. It will bring you
new vaping experience than ever.
Length(battery and cartomizer): 151.50mm
4 plug types available:Diameter:16.56mm
US plug, EURO plug, UK plug and Australia plug
The kit comes with
- 1x battery (1300mAh)
- 1x clearomizer(1.8ml)
- 5x coil unit(1.5ohm)
- 1x adpater
- 1x USB cord
- 1x manual
Simple packing. Customary Packing from the factory,the packing is subject to change without notice.
Battery safe hole design. Upgrade Dual Coil. Upgrade Airflow Control Valve V2
1. New EMOW VV Battery 1300mAh.
2. New Aerotank EMOW cartomizer
3. Pyrex Glass Stainless Material
4. Upgrade Dual Coil (Stainless Steel)
5. Upgrade Airflow Control Valve V2
6. Low Resistance
7. Huge Vapor
8. The battery bottom comes with a safe hole design
1) How to turn on the battery
The EMOW battery comes with 5-click protection: Generally, the
battery is shipped in the off position. In off position, the battery
will not function even when pressing the button. To turn on battery,
press manual button 5 times within 2 seconds. You will see colorful LED
blink 3 times. To turn off battery, press manual button 5 times within 2
second as well, the colorful LED will also blink 3 times! "5-click
protection" can protect the battery from being activated when you do not
want or do not use it. No more firing in your pocket!
Specially, you can adjust the battery's output voltage by pressing
the button 3 times in one second while the LED light will blink 3
times. 3.7V(Red light), 4.2V(Green light), 4.8V(White light)
There is a sticker on the battery for power on guidence. Please remove it before use.
When the battery power is low, the battery LED flashes 15
times continuously while pressing the button, pls get the battery
To charge the battery, pls gently screw the battery into the USB
charger. Plug the USB charger into the USB port of an AC-USB charger or
a computer. It takes about 4 hours to fully charge the battery.
1.You should use only the dedicated USB charger for the battery.
2. Pls Fully charge the battery before using to maintain a good battery life span.
3) How to fill in e-juice
1. Turn upside down the cartomizer, then screw off the connector.
2. Use the syringer or dropper to fill less than 1.8ml e-Liquid. Do not overfill it.
3. Carefully screw on the connector, connect it with the battery and enjoy it.
4) How to control the Airflow
When the hole and groove are overlapped, rotate the hole from left to
right to get bigger airflow which reaches the Max on the rightest side.
If the hole and the groove are not overlapped, the airflow is locked
and no vapor comes out.
5) How to replace the coil unit/coil head
Turn upside down the cartomizer, then screw off the connector. Take
out the old coil unit from the bottom base, replace with new one. So
How to remove your BDCC cartomizer from battery?
Hold bottom of the cartomizer when you separate it from battery.
Please do not screw the cartomizer from the top or middle of the
cartomizer, just in case the e-liquid pour out.
1. The cartomizer comes with eGo thread and the battery comes with 510/eGo thread, it can work with 510/eGo thread cartomizers.
2.No e-Juice e-Liquid included. You still need order e-liquids
3. You can choose the Aerotank EMOW cartomizer
4. You can choose the replacement coil unit. And the resistance value needs to be 1.5ohm~3.3ohm.
5. There is CE mark on the e-cig battery connector.