30W Eleaf iStick or iStick box mod
is an newly launched battery with a fashionable metallic appearance.
With a compact size, you can hold that in the palm, much more convenient
for usage and portability. Four bright colors with powerful functions.
The highlight is the incremental OLED screen.
Size (length x width x height): 32 x 20 x 77 mmCapacity: 2200mAh
Thread Type: 510 Thread
Variable voltage: 2.0V - 8V
Variable wattage: 5W - 30W
Minimum resistance value: 0.4ohm
30W iStick full kit comes with
- 1 x iStick battery
- 1 x 510-eGo adapter
- 1 x AC-USB ADAPTER
- 1 x Micro USB cable
- 1 x Manual
1. OLED screen
2. 2200mAh large capacity
3. 30W strong output wattage
4. Adjustable voltage
5. Spring connector
6. Pass-through function
7. High Stability: The output wattage
is in high stability. It can also be up to the high output wattage even
in the case of low power.
Switch the VV/VW mode:
Press the square button for three times to switch the VV/VW mode when
the battery is turned on. In VV mode, you can adjust output voltage
between 2.0V-8.0V. In VW mode, you can adjust output wattage between
Adjust the voltage/wattage: Press the up-and-down arrow
buttons to increase or decrease the voltage/wattage. Keep pressing the
up/down arrow button, voltage/wattage will increase or decrease slowly
at first, then they will increase/decrease at a constant high speed. The
number will stop increasing/decreasing when you loosen the up/down
Lock and Unlock:
Keep pressing up-arrow button and down-arrow button simultaneously for 2
seconds when the battery is on, then they will be locked and the screen
will reflect “Lock”. Still keep pressing simultaneously for 2 seconds
to unlock them and the screen will reflect “Unlock”. Through these
operations, you can protect the buttons from unintentional presses and
prolong their service life.
Switch the display mode: Keep pressing up-arrow button
and down-arrow button simultaneously for 2 seconds when the battery is
off, the screen display will rotate 180 degrees. You can view the screen
from two kinds of angle through this operation.
How to charge: iStick 30W is charged through USB port
at the bottom of battery. It will take 2.5 hours to fully charge the
battery via 1A wall adaptor.
The battery level indicator on the OLED screen will keep flashing during
charging. When fully charged, the indicator will stop flashing and keep
shining for 15 seconds then go out.
- It comes with extra an 510-eGo thread, can work with ego/510 threaded clearomizers/tanks.
- No cartomizer/tank comes with.
- There is CE mark on battery end.